Centrostal Serwis service center offers services in the field of sheet metal cutting into coils with the possibility of edge trimming.
Technical parameters of the cut material
- type of sliced material: cold rolled and hot rolled steel sheets and galvanized with electrolytic or fire coating
- material thickness: 0.6 – 8.0 mm
- width: 400 – 2200 mm
- inner diameter of the coil: 408 – 1000 mm
- outer diameter of the coil: 600 – 2400 mm
- coil weight: 40 tons
- yield point: 380 MPa
- tensile strength: 610 MPa
Technical parameters of cut sheets
- thickness: 0.6 – 8.0 mm
- width: 400 – 2200 mm
- length (CNC controlled, depending on customer needs) 600 – 12 500 mm
- waste with longitudinal trimming of metal edges min 8 mm – max 20 mm on one side
Technical parameters of the sheet pack
- length: 600 – 12500 mm
- width: 400 – 2200 mm
- weight up to 6 tons
Sheet length | Sheet length tolerance | Sheet length | Diagonal length tolerance |
< 1 000 mm | ±0,6 mm | < 1 000 mm | ±1,5 mm |
< 2 000 mm | ±0,7 mm | < 2 000 mm | ±1,7 mm |
< 3 000 mm | ±0,8 mm | < 3 000 mm | ±1,9 mm |
< 5 000 mm | ±0, 9 mm | < 5 000 mm | ±2,3 mm |
< 6 000 mm | ±1,0 mm | < 6 000 mm | ±2,5mm |
< 8 000 mm | ±1,2 mm | < 9 000 mm | ±3,6mm |
< 10 000 mm | ±1,5 mm | < 12 000 mm | ±4,5 mm |
< 12 000 mm | ±2,0 mm |
Tolerances of sheet width for longitudinal trimming from +0.5 mm to +1 mm depending on the thickness of the material to be cut